Surface Preparation

MIXCOAT

SCRATCH  COAT MORTAR

MIXCOAT is one component cementitious dry blend of Portland cement, sand and other special binders. It is specifically used as a leveling scratch coat to prepare concrete or wood substrates before setting ceramic tiles.

MIXCOAT is used as a setting bed with metal lath for ceramic tile, Stone, terrazzo, quarry tile, paver tile, Wood, parquet and carpet over exterior grade plywood for interior residential light -duty floors in dry areas only, concrete, concrete terrazzo, pavers, brick and stone. MIXCOAT may also be used as a leveling coat on vertical or horizontal concrete surfaces where a smooth, even substrate is required.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

MIXLEVEL

HIGH PERFORMANCE SELF-LEVELING UNDERLAYMENT

MIXLEVEL is a cementitious polymer modified free-flowing self-leveling underlayment used to level and repair interior substrates over concrete and plywood surfaces in residential, institutional and commercial applications. It gives flat, smooth and hard leveled surfaces for the installation of finished flooring. All types of ceramic or natural stone tiles can be applied after 24 hours and other floor coverings after 48 hours.

Levelling, smoothening and repairing all concrete and exterior-grade plywood surfaces where floor covering are to follow in residential, commercial and institutional interior areas.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

MIXPRIME-LR200

MULTIPURPOSE PRIMER FOR SELF-LEVELING UNDERLAYMENT

MIXPRIME-LR200 is a high performance multipurpose acrylic primer, which is mainly used to prime most substrates including concrete surfaces, wood subfloors, exterior grade plywood surfaces, well bonded vinyl composition tiles “VCT” to be leveled with cementitious self-levelling underlayment “MIXLEVEL”.

To be used in conjunction with self-leveling underlayment “MIXLEVEL” to prime most concrete, exterior grade plywood, epoxy cement terrazzo, cement backers and vinyl sheets substrates before the installation of ceramics, carpets and vinyl finishes. MIXPRIME LR200 can be used for all interior institutional, residential and commercial applications.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

Dry Set Mortar

MIXMASTER

HIGH PERFORMANCE WALL & FLOOR THIN SET MORTAR

MIXMASTER is one component, non-sagging, dry set mortar, consisting of a dry blend of Portland cement, sand and other special binders. It is specifically designed for interior wall and floor applications. MIX-MASTER can also be used both as thin
& medium bed mortars for most types of tile installations. MIXMASTER meets or exceeds ANSI A118.1.

MIXMASTER is used for interior installation of Vitreous ceramic tiles (low absorption) porcelain, slate, quarry and clay tiles, mosaic tiles, paver tile, precast terrazzo, Saltillo, natural stone, granite and marble on wall and floor surfaces of concrete, concrete block, masonry, and brick and it’s Ideally for use with UNCOUPLING MEMBRANE waterproofing membrane system.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

MIXFLOOR

FLOOR THIN SET MORTAR

MIXFLOOR is one component, Dry thin set mortar (Unmodified), consisting of a dry blend of Portland cement, sand and other special binders. It is specifically designed for interior cement floors. MIXFLOOR meets or exceeds ANSI A118.1

Installation of quarry tile, pavers, Saltillo, ceramic mosaics and most other types of non-absorptive or vitreous ceramic tile over interior fully cured concrete floors, Masonry, cement mortar beds and cement leveling coats floors.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

Polymer Modified Mortar

MIXBOND-EXTRA

PROFESSIONAL MULTIPURPOSE TILE MORTAR

MIXBOND-EXTRA is a professional multipurpose; polymer modified thin set mortar. It is specifically designed to improve bonding for the installation of tiles and stones over most interior and exterior surfaces. MIXBOND-EXTRA exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water.

MIXBOND-EXTRA is used for installation of ceramic and porcelain tile, quarry tile, pavers, Saltillo tile, and most types of marble, granite and natural stone over concrete, masonry, terrazzo, cement backer Units (CBUs), Plywood, gypsum board (interior walls in dry areas only), Existing surfaces of properly prepared tile, Properly prepared vinyl composition tile (VCT) and cutback residue (interior only).

MIXBOND-EXTRA is used on most interior and exterior residential wall & floor, on most interior commercial wall and floor, and exterior commercial floor applications.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

MIXBOND-PLUS

PREMIUM MULTIPURPOSE NON-SAGGING TILE MORTAR

MIXBOND-PLUS is a premium grade multipurpose polymer modified thin set mortar, high performance, one component, non-sagging, freeze/thaw, formulated with high dry polymer content to provide superior and exceptional bond strength and flexibility. It can be used for interior/exterior, residential and commercial on wall and floor. MIXBOND-PLUS meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water.

MIXBOND-PLUS is used for installation of Large format tile, Porcelain, ceramic, quarry tile, pavers, saltillo tile, Slate, precast terrazzo, mosaic, and most types of marble, granite and natural stone over concrete, masonry, terrazzo, cement backer Units (CBUs), Exterior grade plywood and gypsum board (interior dry areas only), Existing surfaces of properly prepared tile (interior dry areas only), Properly prepared non-cushion sheet vinyl flooring, VCT or cutback adhesive residue.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

MIXBOND

STANDARD POLYMER-MODIFIED TILE MORTAR

MIXBOND is one component, standard grade polymer modified cement tile mortar, and it’s especially designed to improve the bonding and flexibility characteristics over most surfaces. MIXBOND can also be used both as thin and medium bed mortars for wide range of tile installations. MIXBOND meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water.

Installation of ceramic and porcelain tile, quarry, paver, Saltillo, mosaic, slate, precast terrazzo, marble, granite and natural stone on wall and floor surfaces of concrete, masonry, brick, cement board, terrazzo, Exterior grade plywood and gypsum board (interior dry areas only).

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

MIXFLEX

ULTIMATE HIGH PERFORMANCE TILE MORTAR

MIXFLEX is premium quality, ultimate performance, sag/slump-resistant medium–bed and thin set mortar, universal single-component with high unique polymer
content that provides unparalleled and ultimate bond strength and flexibility for the most demanding installation requirements for commercial, residential and industrial, exterior and interior, freeze/thaw, water-submerged and pools and heavy-traffic durability. MIXFLEX exceeds ANSI A118.4, ANSI A118.15 and ANSI A118.11 requirements when mixed with water.

MIXFLEX is used for installation of porcelain tile , ceramic tile, cultured stone, backsplash tiles, mosaics, glass tile , quarry tile, pavers, Saltillo tile, precast terrazzo, slate and most types of marble, granite and natural stone and other difficult to bond tile and stone on horizontal, vertical and countertop installations in dry and wet area over concrete, masonry, terrazzo, cement backer Units (CBUs), Exterior grade plywood and gypsum board (interior dry areas only), Existing surfaces of properly prepared tile(interior dry areas only), Properly prepared non-cushion sheet vinyl flooring, VCT or cutback adhesive residue.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

MIXLITE

PREMIUM POLYMER MODIFIED LIGHTWEIGHT TILE MORTAR

MIXLITE is a premium grade, single component; polymer modified thin set or medium bed tile mortar, non-sagging and non-slump, high performance, formulated with unique, high dry polymer content to provide superior and exceptional bond strength and flexibility for horizontal, vertical and overhead installations.
MIXLITE meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water, and may contribute to LEED points with more than 20% recycled content.

MIXLITE is used for floor, wall and ceiling installation of ceramic and porcelain tile, quarry tile, pavers, Saltillo tile, and most types of marble, granite and natural stone over concrete, masonry, terrazzo, cement backer Units ((CBUs), Exterior grade plywood and gypsum board (interior dry areas only), Properly prepared vinyl composition tile (VCT) and cutback residue (interior only).

MIXLITE is used on most interior and exterior residential wall & floor, on most interior commercial wall and floor, and exterior commercial floor applications.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

MIX-QUICK

PREMIUM MULTIPURPOSE QUICK SET TILE MORTAR

MIX-QUICK is a premium grade multipurpose quick set mortar for interior and exterior tile installations, high performance polymer modified, one component, non-sagging thin-set mortar for large-format tile, high dry polymer content to provide superior and exceptional bond strength and flexibility. MIX-QUICK can be grouted in 2-4 hours. MIX-QUICK meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water.

MIX-QUICK is used for installation of porcelain tile, ceramic tile, quarry tile, pavers, Saltillo tile, and most types of marble, granite and natural stone over concrete, masonry, leveling coats, terrazzo, cement backer Units (CBUs), Exterior grade plywood and gypsum board (interior dry areas only), Existing surfaces of properly prepared tile (Interior only), Properly prepared non-cushion sheet vinyl flooring and VCT or cutback adhesive residue (Interior only).
MIX-QUICK is used on most interior and exterior wall & floor for residential and commercial in dry and wet areas. (See Commercial Exterior specifications under “Limitations”)

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

Premium Mortar System

MIXMASTER/LR100 SYSTEM

PREMIUM, HIGH PERFORMANCE TILE MORTAR SYSTEM

MIXMASTER+LR100 is two part system, premium quality and high performance, provides unparalleled and exceptional bond strength, flexibility, flexural strength, elongation and freeze/thaw durability for the most demanding installation requirements for commercial, residential and industrial, exterior and interior, water-submerged and heavy-traffic installations.
MIXMASTER+LR100 exceed ANSI A118.4, ANSI A118.15 and ANSI A118.11 requirements.

MIXMASTER+LR100 is used for installation of porcelain tile, ceramic tile, stone, mosaics, glass tile, quarry tile, pavers, Saltillo tile, precast terrazzo, slate and most types of marble, granite and natural stone and other difficult to bond tile and stone on horizontal, vertical and countertop installations in dry and wet area over concrete, masonry, terrazzo, cement backer Units (CBUs), Exterior grade plywood and gypsum board (interior dry areas only), Existing surfaces of properly prepared tile(interior dry areas only), Properly prepared non-cushion sheet vinyl flooring, VCT or cutback adhesive residue.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

Grout

MIXGROUT-SANDED

POLYMER MODIFIED SANDED GROUT

MIXGROUT-SANDED is a premium grade polymer modified sanded Portland cement tile grout, one component dry blend consisting of Portland cement, silica sand, selected polymers, and other special chemicals that require the addition of water for mixing. It is designed for grouting all types of wall and floor tiles.
MIXGROUT-SANDED meets or exceeds ANSI Exceed A118.6 ANSI standards requirements when mixed with water.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

MIXGROUT-UNSANDED

POLYMER MODIFIED UNSANDED GROUT

MIXGROUT-UNSANDED is a premium grade polymer modified unsanded cement tile grout, one component dry blend consisting of Portland cement, fine aggregates, selected polymers, and other special chemicals that require the addition of water for mixing. It is designed for grouting all types of wall tiles at joint widths of 1.5 to 3 mm (1/16″ to 1/8″) in dry and wet areas.

MIXGROUT-UNSANDED meets or exceeds ANSI Exceed A118.6 ANSI standards requirements when mixed with water.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

Additives

LR-100

ACRYLIC LATEX ADDITIVE FOR MORTAR AND CONCRETE

LR-100 is an acrylic based polymer latex additive used to improve the performance of cementitious mortars, plasters, stuccos, concrete mixes and dry-set mortars as well as Mixfloor, Mixmaster and Mixbond tile mortar. It is specifically designed to improve bond strength, flexural strength, elongation and Freeze/thaw durability.
LR-100 meets or exceeds ANSI A118.4 and ANSI A118.11 bond strength requirements.

LR-100 + Mixfloor, Mixmaster or Mixbond mixes gives excellent adhesion to ceramic and porcelain tile, quarry tile, pavers, Saltillo tile, and most types of marble, granite and natural stone on most wall and floor of Interior and exterior residential and commercial surfaces, and can be mix with all types of cement mortars and concrete mixes to improve the performance, bond strength and flexural strength.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

Adhesive (Mastic)

ACRYMIX-G

GENERAL PURPOSE TILE ADHESIVE

ACRYMIX-G is a general purpose acrylic based tile adhesive, low VOC, non-flammable, water-resistant, solvent free, smooth and creamy acrylic formula spreads easily provide excellent slip resistance on vertical applications, designed for
interior residential wall surfaces. ACRYMIX-G meets or exceeds ANSI A136.1 Type 1 requirements.

ACRYMIX-G is used for installation of most types of ceramic and mosaic tile up to 8″ x 8″ (30 x 30 cm) on interior residential wall applications over fully cured concrete, Cement Plaster, Cement Block, concrete backer board, water resistant gypsum board (dry areas only), exterior grade plywood. It can be used for exterior residential light-duty floor tile installation (maximum dimension: 6” x 6” (15 x 15 cm)) in dry areas only.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

ACRYMIX-HP

HIGH PERFORMANCE TILE ADHESIVE

ACRYMIX-HP is a high performance, flexible, high-polymer content tile adhesive with high bond strengths. It offers superior adhesion for ceramic and porcelain on walls or floors, low VOC, non-flammable, water-resistant, solvent free, smooth and creamy acrylic formula spreads easily provide excellent slip resistance.
ACRYMIX-HP meets or exceeds ANSI A136.1 Type 1 requirements.

ACRYMIX-HP is used for installation of ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile on walls or floors for residential and light commercial, up to 12″ x 12″ (30 x 30 cm) wall applications and up to 6″ x 6″ (15 x 15 cm) on floors in dry areas only over fully cured concrete, Cement Plaster, Cement Block, concrete backer board, water resistant gypsum board (dry areas only), exterior grade plywood, existing ceramic tile and on shower or tub surround walls with precast bases.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET

ACRYMIX-M

PREMIUM MULTIPURPOSE TILE ADHESIVE

ACRYMIX-M is a premium grade multipurpose ceramic tile adhesive, low VOC, non-flammable, water-resistant, solvent free, smooth and creamy acrylic formula spreads easily provide excellent slip resistance on vertical applications, designed for interior residential and light commercial wall surfaces and for interior residential floors in dry areas only. ACRYMIX-M meets or exceeds ANSI A136.1 Type 1 requirements.

ACRYMIX-M is used for installation of all types of ceramic and mosaic tile up to 12″ x 12″ (30 x 30 cm) on interior wall applications for residential and light commercial and up to 6″ x 6″ (15 x 15 cm) on floors and countertop for interior residential in dry areas only over fully cured concrete, Cement Plaster, Cement Block, concrete backer board, water resistant gypsum board (dry areas only), exterior grade plywood.

DOWNLOAD DATA SHEET
DOWNLOAD MSDS SHEET